Sunday, February 27, 2022

NGC3226 & 3227 (ARP94)


Galaxy NGC3227 is interacting with dwarf galaxy NGC3226, both are located in constellation Leo and more then 50 million ly away from Earth. Galaxy NGC3227 has an Active Galactic Nucleus (AGN) and contains a supermassive blackhole (14 million solarmasses). The interacting galaxies are also categorised as ARP 94.

Setting : ASI2600MC with TAL200K f/8.5, guidescope ZWO30/120 with ASI224MC; lights 11x300s, darks, flats, darkflats and bias.
Software : N.I.N.A, APP, Stellarium, PHD2, CS4.
Seeing : moderate with hig clouds.

NGC2362 Tau Canis Majoris Cluster


NGC2362 (Tau Canis Majoris Cluster) is located in constellation Canis Major and about 5000 ly away from Earth.
Setting : ASI2600MC with TAL200K f/8.5 and Guidescope ZWO 30/120 with ASI224MC; lights 6x300s, darks, flats, darkflats, bias
Software : N.I.N.A, PHD2, Stellarium, APP, CS4, DeNoise AI.
Seeing : moderate with high clouds. 

Saturday, February 26, 2022

Startrail


A startrail was made by taking 219 pictures of the winter constellations Orion, Gemini, Canis Major & Minor, Auriga and Taurus. 
Setting: Nikon D7500 10mm f/4.5 ISO400 219x30s. Startrails v2.3 was used to combine all pictures and CS4 for final editing. 


Saturday, February 19, 2022

Filaments in H-Alpha ARF & QRF

Filaments in H-Alpha:
ARF : Active Region Filaments or Prominence
QRF : Quiescent Region Filament or Prominence - also Quit Region Filament.



The Sun in H-Alpha


Clear sky this morning and aperfect moment to test my new ASI290MM camera. My First Light test was done using SolarMaxIII DS 70/400 f/5.7.
Imaging was done with ASIStudio and stacking using AutoStakkert!3, final editing with CS4. The solar disk is not fully captured, not fitting in the field of view.





Wednesday, February 16, 2022

First ARISS special digital SSTV experiment testing KG-STV

The first digital SSTV experiment using KG-STV is planned for 20 February 2022 between 05h12 UT and 11h51 UT. This timewindow is for five ISS passes over Europe. 

The ISS crossband repeater operates on a downlink of 437.800 MHz. Each transmission sequence will consist of 1m40s transmission, followed by 1m20s pause and will be repeated several times within an ISS pass over Europe.

The used modulation is MSK without error correction. For the decoding of the 320 x 240 pixel image, the software KG-STV is required. The KG-STV software can be downloaded from the following link: "http://amsat-nl.org/wordpress/wp-content/uploads/2022/02/kgstv_ISS.zip"

The ZIP file contains the KG-STV program, an installation and setup manual, some images and MP3 audio samples for your first tests as well as links for additional technical information about the KG-STV use.
After downloading I was able to test the set up using the embedded MP3 file with below result.



Via Sigidwiki.com:

KG-STV is an image transmission mode developed by JJ0OBZ in Japan. The mode transmits one 16x16 compressed jpeg block at a time, so that partial transmissions can still reveal the image with missing holes. You can see each block as it's received being reconstructed. The software allows the receiver to send a repeat request in case there are received blocks that have errors. In addition to images, users can send and receive short text messages to each other with this mode.

KG-STV has two modulation modes. MSK (Minimum Shift-Keying) and 4LFSK (4-Level Frequency-Shift Keying). The 4LFSK mode transmits twice as fast as MSK, but is more prone to being affected significantly by propagation effects. Most transmissions are done in MSK mode. Each mode has a choice of convolution encoding or no encoding. The error correction used is Viterbi Encoding (NASA standard K=7 mode)

MSK uses two frequencies, 1800 Hz for 1 and 1200 Hz for 0. For 4L-FSK, '00' 1200 Hz; '01' 1400 Hz; '10' 1600 Hz; '11' 1800 Hz.

All signals operate at 1200 Bd, and occupy a bandwidth of between 500 Hz to 2500 Hz, depending on signal quality.